Shop – Abanaki Oil Skimmers

PetroXtractor® Well Oil Skimmer

admin — Thu, 27 Jan 2022 16:44:30 +0000

The Abanaki PetroXtractor is a dependable and cost effective means of removing oil, fuel, and other floating hydrocarbons from water where access to the fluid surface is limited. It acts efficiently as remediation equipment for groundwater contaminated by oil, using existing recovery and monitoring wells. Often, the PetroXtractor Well Oil Skimmer working alone will reduce oil or fuel content to an acceptable E.P.A. level. Models are available for two inch, four inch, and six inch or larger ID well casings, with removal rates up to 12 gph. (based on SEA 30 motor oil). Depths of 100 feet or more can be accommodated without the use of pumps. The PetroXtractor is a well oil skimmer that makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the unit’s continuous belt to attract floating oil in the well. After picking up the oil, the belt travels over the head pulley on the drive unit and through tandem wiper blades. The oil is then scraped off both sides of the belt and discharged through a 1-1/4″ ID hose. The unique bearing-less design of the tail pulley (immersed in the well water) with its tethered frame allows it to perform three important functions: it keeps proper tension on the belt, prevents accidental loss down the well, and keeps the belt centered in the casing. The PetroXtractor Well Oil Skimmer can be installed in existing wells by mounting it on a flat surface above the well casing. Oil Skimmer operation consists of merely lowering the belt and tail pulley into the casing until the pulley is fully immersed, placing the discharge hose in a container, and switching the unit on. For PetroXtractor 1 in Oil Skimmer: Part# SPXA For PetroXtractor 2 in Oil Skimmer: Part# SPXB For PetroXtractor 4 in Oil Skimmer: Part# SPXC Call for price and delivery [maxbutton id="3" url="https://info.abanaki.com/petroxtractor-quote-request" window="new" ]

Oil Removal: Oil Viper Tube Oil Skimmer

admin — Thu, 27 Jan 2022 16:33:45 +0000

One of the key features of the Oil Viper is its unique method of removing oil from the tube. The specially designed wiper combination attached to the tube, along with the ceramic wiper on the skimmer, ensures that the tube remains virtually free of oil as it collects and removes surface oils. This not only improves efficiency but also minimizes maintenance requirements.

The Oil Viper boasts impressive removal rates, with the potential to remove up to 100 gallons of oil per hour. This makes it a highly desirable solution for facilities with large volumes of surface oil that need to be removed quickly and efficiently.

In addition to its impressive performance, the Oil Viper is also built for durability and longevity. It is constructed using high-quality materials that can withstand harsh industrial environments and operate continuously without breaking down. This makes it a cost-effective solution in the long run, as it requires minimal maintenance and replacement costs.

Part# SVIPER01

Call for price and delivery

[maxbutton id="3" url="https://info.abanaki.com/oil-viper-quote-request" window="new" ]

Oil Grabber® Model MB Belt Oil Skimmer

admin — Thu, 27 Jan 2022 16:25:05 +0000

The Abanaki Model MB Oil skimmer is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model MB alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with a coalescing system. The Model MB oil skimmer utilizes continuous belts and wipers to remove up to 200 gallons of oil per hour from the fluid surface. The belts, operating on a motor and pulley system, run through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belts pass through tandem wiper blades where oil is scraped off both sides of each belt and discharged. The tail pulleys have flanges which allow them to roll freely on the inside of the belts without becoming dislodged. These lower pulleys require no bearings and do not need to be fastened to the tank. If turbulent conditions exist, an optional tether and cage assembly prevents the tail pulleys from being dislodged. Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belts to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model MB Oil Skimmer can be used in tanks with depths as shallow as one foot or as deep as 100 feet. For Model 2x8: Part# SMB2 For Model 3x8: Part# SMB3 For Model 5x8: Part# SMB5 Call for price and delivery [maxbutton id="3" url="http://info.abanaki.com/model-mb-quote-request" window="new" ]

Grease Grabber® Belt Oil Skimmer

admin — Thu, 27 Jan 2022 15:19:38 +0000

The Abanaki Grease Grabber is a dependable and effective means of skimming oil and floating grease from water, under the most demanding conditions. The Grease Grabber makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the skimmer belt to attract grease, oil, and other hydrocarbon liquids as the belt passes through the surface of the water. The skimmer belt specifically selected for your application. Texture pinch rollers pull the belt over the idler pulley and through the angled wiper blades, where grease is removed before passing through the pinch rollers. The grease is rolled off into a heated hopper, which maintains fluidity for easy drainage through a 4″ ID discharge port. Belt tension is maintained by the weight of a free riding tail pulley. The tail pulley is tethered to the underside of the Grease Grabber to prevent accidental loss. Part# SGG Call for price and delivery [maxbutton id="3" url="https://info.abanaki.com/grease-grabber-quote-request" window="new" ]

Oil Grabber® Model 8 Belt Oil Skimmer

admin — Thu, 27 Jan 2022 14:47:21 +0000

The Abanaki Model 8 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, belt oil skimmers alone will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 8 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems. The Model 8 belt oil skimmer utilizes a continuous belt and wiper to remove up to 40 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt and discharged. The tail pulley has flanges which allow it to roll freely on the inside of the belt without becoming dislodged. It requires no bearings and does not need to be fastened to the tank. If turbulent conditions exist, an optional tether and cage assembly prevents the tail pulley from being dislodged. Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt skimmer to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model 8 can be used in tanks with depths as shallow as one foot, or as deep as 100 feet. Part# SM8 Call for price and delivery [maxbutton id="3" url="https://info.abanaki.com/model-8-quote-request" window="new" ]

Oil Grabber® Model 4 Belt Oil Skimmer

admin — Thu, 27 Jan 2022 14:33:35 +0000

The Abanaki Model 4 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 4 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems as part of an industrial wastewater treatment plan. Model 4 belt oil skimmers utilizes a continuous belt and wiper to remove up to 20 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt and discharged. The tail pulley has flanges which allow it to roll freely on the inside of the belt without becoming dislodged. It requires no bearings and does not need to be fastened to the tank. If turbulent conditions exist, an optional tether and cage assembly prevents the tail pulley from being dislodged. Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model 4 can be used in tanks with depths as shallow as one foot, or as deep as 100 feet. Part# SM4 Call for price and delivery [maxbutton id="3" url="https://info.abanaki.com/model-4-quote-request" window="new" ]

ChillyBox™ Panel Chiller NEMA Cooler

admin — Fri, 30 Jul 2021 20:32:03 +0000

The Abanaki ChillyBox Panel Chiller is designed to cool NEMA 4 and NEMA 12 industrial cabinets using filtered compressed air. The ChillyBox helps maintains temperature and air quality within the enclosure, helping to reduce loss of production time that typically occurs when control panels overheat. For Model BTU 400: Part# CX4 For Model BTU 900: Part# CX9 Call for price and delivery

Shaft and Coupling for Abanaki Model 8 Belt Oil Skimmer

admin — Fri, 30 Jul 2021 20:18:30 +0000

Replacement Part for Abanaki Model 8 Belt Oil Skimmer. The Abanaki Model 8 is a dependable and effective means of removing free floating oil from water and water-base solutions. In some cases, skimming by itself will reduce oil to an acceptable level of water purity. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems. Part# PM8-12 Call for price and delivery

Wiper Blade Sets for Tote-It Oil Skimmers

admin — Fri, 30 Jul 2021 20:11:51 +0000

Replacement sets for the following products: For 2" Nitrile Wiper Blades (ST2CR): Part# PTI-09BN For 4" Hybrid Wiper Blades (ST2EL): Part# PTI-09CH For 4" Nitrile Wiper Blades (ST2CR): Part# PTI-09CN

Cassette With Drive Gears for STUBE1 Tubetastic Oil Skimmer

admin — Fri, 30 Jul 2021 20:05:42 +0000

Part# PTUBE-11 Replacement part for Tubetastic tube skimmer. The TubeTastic! can be easily mounted on the side of virtually any machining center coolant sump.