- Requires only a small area in the tank or sump.
- Easy mounting.
- High temperature capability.
- Chip resistant powder finish.
- Hazardous duty and food grade options.
- Custom designs and turnkey systems available.
- Fast cleaning with minimal maintenance.
Oil Grabber® Model 4 Belt Oil Skimmer
The Abanaki Model 4 Oil Grabber is a dependable and effective means of removing oil from water and water-base solutions. Often, oil skimming by itself will reduce oil to an acceptable level of water purity. Depending on the characteristics of the liquid, it is possible for the Model 4 alone to reduce oil content to less than five parts per million in water. The unit can be used as a pretreatment before filtration, and in conjunction with coalescing systems as part of an industrial wastewater treatment plan. Model 4 belt oil skimmers utilizes a continuous belt and wiper to remove up to 20 gallons of oil per hour from the fluid surface. The belt, operating on a motor and pulley system, runs through contaminated liquid to pick up oil from the surface. After traveling over the head pulley, the belt passes through tandem wiper blades where oil is scraped off both sides of the belt and discharged. The tail pulley has flanges which allow it to roll freely on the inside of the belt without becoming dislodged. It requires no bearings and does not need to be fastened to the tank. If turbulent conditions exist, an optional tether and cage assembly prevents the tail pulley from being dislodged. Oil skimming makes use of the differences in specific gravity and surface tension between oil and water. These physical characteristics allow the belt to attract oil and other hydrocarbon liquids from the surface of the fluid. The Model 4 can be used in tanks with depths as shallow as one foot, or as deep as 100 feet.
Request QuoteOil Removal Rate: | 16 gph (60 lph) with standard tail pulley. 20 gph (75 lph) with high capacity tail pulley. (Removal rate is based on 30 weight oil in water.) |
---|---|
Tail Pulley: | Specify standard or high capacity. (The high capacity option uses a patented pulley design that improves the adherence of oil to the inside |
Motor: | Fractional hp, TEFC, gear motor operating on either 115/230VAC, single phase, 60Hz or 230/460 VAC, Optional: 50Hz power source; explosion proof; drip proof; |
Belt Width: | 4 in. (10 cm). |
Belt Length: | User specified (up to 100′, measured from the center of head pulley to center of tail pulley) |
Belt Material: | Specifically selected for your application |
Wiper: | Nitrile standard; CRV optional. Specify wiper material based on temperature and fluid compatibility. (See “Operating Limits.”) |
Mounting Method: | Standard: Bracket for customer-supplied steel channel, with oil discharge through the channel. Option: Flat surface mount with oil discharge through a 1-1/2 in (3.75 cm) NPT male pipe fitting. |
Weights 1: |
Drive assembly and housing with motor, without belt or tail pulley: 71 lbs. (32 kg) max. Standard or high capacity tail pulley: 8 lbs. (3.6 kg) 4 ft. corrosion-resistant steel belt: 4 lbs.(1.8 kg) (belt weight varies according to actual length specified) |
Options (Specify): |
|
Wipers
Temperature of Liquid | pH 3-5 (acidic) | pH 6-8 (neutral) | pH 9-13 (alkaline) |
---|---|---|---|
33°F-180°(0.5°C – 82°C) | CRV | nitrile | CRV |
181°F-212°F(83°C-100°C) | CRV | CRV | CRV |
Belts
Temperature of Liquid | pH 3-5 (acidic) | pH 6-8 (neutral) | pH 9-13 (alkaline) |
---|---|---|---|
33°F-180°(0.5°C – 82°C) | CR steel, elastomer, polymer | CR steel, polymer, HT polymer | polymer, HT polymer |
181°F-212°F(83°C-100°C) | CR steel | CR steel | CR steel |
Standard Configuration: The standard Model 4 is supplied with a motor belt guard, spring-loaded adjustable wiper blade assembly, skimmer belt, tail pulley, and assembly instructions.
Specification Notes: The Model 4 is UPS shippable.Consult factory for recommendations covering operating conditions not listed here.
Related products
-
Tote-It® Portable Belt Skimmer
$1,687.00 – $1,921.00Select options This product has multiple variants. The options may be chosen on the product page
Abanaki Corporation Oil Skimming Division
17387 Munn Road
Chagrin Falls, OH 44023
Phone: (440) 543-7400
Email: skimmers@abanaki.com
Fax: (440) 543-7404
ISO 9001:2015 Certified Company