800-358-7546

Linkedin
Twitter
Facebook
YouTube
RSS

Oil Concentrator® - Oil Water Separator

Request Literature  Request a Quote

  • Overview
  • Features
  • Specifications
oil water separator

Overview

The Abanaki Oil Concentrator performs as a virtually complete oil water separator for recycling or disposal of either liquid.

Under most operating conditions, Abanaki skimmers pick up oil with only small traces of water. However, as surface oil is reduced to a thin layer (1/16 inch thick or less), more water (or coolant) may be picked up along with the oil. When used in tandem with an oil skimmer, the Oil Concentrator solves this problem by providing final phase separation. The result is water (or coolant) available for recycling, and virtually water-free oil for disposal.

This oil water separator is non-electrical and contains no moving parts — it simply receives liquid directly from the skimmer. Based on the principle of gravity separation, the Oil Concentrator tank comes in three sizes so that there is adequate dwell time for the oil and water to separate. Water discharge is through a tube that has an open end near the bottom of the Concentrator, while oil flow is through a separate drain port near the top. As additional liquid enters the Concentrator, water and oil are forced out through their respective disposal tubes.

Installed at the discharge end of the oil skimmer, the Concentrator comes complete with mounting bracket, removable sludge screen and drain plug for easy cleaning. An optional thermostatically controlled heater is available for use with thick oils, or when the application is in freezing temperatures. (A heater should not be used in environments where explosive fumes might be present.)

Abanaki recommends the use of the Concentrator with all belt oil skimmers. It increases the efficiency of the skimmer and reduces costs associated with oil disposal.

  • Slashes disposal costs by providing water-free oil for disposal
  • Oil Water separation is virtually complete
  • Helps increase the recycle value of skimmed oil
  • Saves costly coolant and washing solutions from premature disposal
  • Available for all Abanaki belt oil skimmers

Oil Water Separator Features

  • Mounts easily on all Abanaki skimmers
  • Brackets and hardware supplied by Abanaki
  • Corrosion resistant finish
  • Sludge screen keeps large debris out of skimmed oil
  • Drain plug facilitates routine maintenance
  • Optional heater keeps oil flowing in cold environments

Oil Water Separator Specifications

Concentrator Tank
Applications
and Volumes:
OC-200 for all Multi-Belt units: 17 gallons (64.4 liters).
OC-100 for Model 8 and Model 4: 2.5 gallons (9.5 liters).
DM-100 for Tote-It and Mighty Mini: 0.56 gallons (2.1 liters).
Materials: OC-100 and 200: steel weldments with a corrosion resistant coating.
DM-100: fiberglass construction.
Mounting Method: All brackets and hardware supplied by Abanaki. No skimmer modifications required.
Mounting Area and Weights: See installation drawings and tables.
Options (Specify): Models OC-100 & OC-200:
316 stainless steel construction.
Thermostatically controlled (500W/110v) heater.
Discharge hose kit (see installation drawing & table).
Model DM-100:
Discharge hose kit (see installation drawing & table).
Operating Limits: Temperature of liquid: 33 F - 212 F (0.5 C - 100 C).
Carbon steel units --- pH of liquid: 5 - 10.
Fiberglass or stainless steel units --- pH of liquid: 0 - 13.
Specification Notes:
  • Oil Concentrators are UPS shippable.
  • Consult factory for recommendations covering operating conditions not listed above.

Contact Abanaki


   Abanaki - Oil Skimmer Facts


 


Everything you need to know about oil skimming!

Get our FREE Oil Skimmer Facts Handbook now.

close window

 

   Abanaki - Oil Skimmer Facts


 


40 real-world implementations of oil skimming!

Get our FREE Solutions Sourcebook now.

close window