See Other Products

The EconoMini belt oil skimmer is an ultra-compact belt oil skimmer designed for use in coolant sump and parts washer applications. The skimmer can fit in tight spaces where other skimmers can't.

Standard Features:

• Long lasting, quiet 110v 1ph 60 Hz motor
• Polyurethane and stainless steel belts available
• Tethered tail pulley
• 8, 12, 18, and 24" lengths available
• Tiny Footprint; requires little mounting space
• No assembly required

Applications:

Chiperator™

Chip and Coolant Separation System. The air driven Chiperator vacuums and filters old cutting fluids loaded with chips from machine sumps, tanks and parts washers. When the optional Abanaki's Lil' Blue™ skimmer is purchased, the coolant will also be cleansed of tramp oils. 

Save money by making old coolant useable again. The Chiperator is an inexpensive way to clean dirty machine sumps. The air driven Chiperator quickly separates chips and swarf from liquids. It drains or refills its 55 gallon drum in less than 2 minutes! Simply suck up coolant laden with chips, swarf and muck, and the Chiperator strains the unwanted solids. The Chiperator then pumps the strained coolant back to the sump.

Standard Features:

• Strains 40 gallons of chips and coolant per minute
• Efficient venturi design consumes less air than competitive models
• Acts as both a vacuum and a pump
• Economical, disposable filter bags make cleanup a breeze
• Filters out chips and shavings from plastic, steel, aluminum, ceramic, etc.
• Quiet; less noise than other air driven or electrical units
• No moving parts
• Equipped with float valve to automatically shut off unit when drum is full
• Equipped with automatic pressure relief valve for added safety
• Complete with on/off valve for easy shutoff

Animated Demo:

View Animation

Case Studies

• FMC Technologies

Chiperator Online Ordering 

Plastic Disk Skimmer

The inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki!

• Durable engineered polymer housing won't corrode
• Capped troughs prevent oil drips
• Boomerang blades wipe more oil off disk
• Shaft is sealed to prevent premature motor wear from oil contamination

Disk type oil skimmer with 1/2" x 12" disk and 110v fan cooled gear motor. Disk skimmer is constructed entirely of plastic and features plastic motor housing and frame.

Plastic Disk Skimmer Online Ordering

Chip Grabber™

The Abanaki Chip Grabber removes chips and skims oil from coolant tanks and machine tool reservoirs. The unique design allows it to pick up steel chips, turnings and grindings from the bottom of the coolant reservoir as well as floating tramp oils from the surface. The special magnetic tube snakes along the bottom of the reservoir attracting the chips and swarf. As the tube returns to the Chip Grabber, floating oil is attracted and picked up as well. The result: chip free and oil free coolant. This unit can be easily mounted on the side of virtually any machining center coolant sump. By use of an existing opening or by making a small access cutout, the collector tube runs through the surface of the coolant and collects the unwanted steel chips and tramp oils. The chips are dropped into a slide-out tray, and the oil flows out of the discharge tube into any waste oil container. View an application photo of the Chip Grabber.

Standard Features:

• Continuously removes chips and tramp oil, decreasing downtime
• Integrated decanter ensures coolant-free oil discharge
• Oil pickup rate of up to 1 1/2 g.p.h.
• Slide out dump tray for easy chip disposal
• Set up and put in use in just minutes
• Standard tube lengths in reach: 8", 12", 18", 24", and 30".

Chip Grabber Online Ordering

Mighty Disk™ Oil Skimmer

The inexpensive way to remove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki! Effective. Removes up to 1 1/2 gallons of oil or more of medium weight oil per hour. Compact. Use it almost anywhere a flat surface is available for mounting. Portable. Weighs less than 10 pounds, installs in no time, and runs on 110v power. Complete. Put it to work right out of the box.

Standard Features:

• Available in 12" and 18" diameters
• 110v fan-cooled motor
• High temperature disk material
• Quality construction

Optional Features:

• SS construction with integrate 24 hour timer

Mighty Disk Online Ordering

Mighty Mini® SST Oil Skimmer

The ideal solution to remove unwanted oil in coolants & parts washers! Effective. Removes one (1" wide belt) or two (2" wide belt) gallons or more of medium weight oil per hour. Compact. Use it almost anywhere...even through a 2" dia. bunghole in a drum. Portable. Use it here today, there tomorrow. Weighs only 7 pounds, installs in seconds and runs on 110v. power. 220v motor available. Complete. Put it to work right out of the box, or add the option, easy-to-install decanter and brackets for an even more efficient system. Durable. Includes long life fan-cooled motor, sturdy 304 stainless steel construction with integrated 24 hour timer. Every Abanaki skimmer is backed as well as it's built. We do it right or you don't pay!

• Fan-cooled motor
• 1" and 2" wide stainless steel or specially-engineered plastic belts
• Both sides of belt are wipes for better efficiency
• 304 stainless steel base and housing
• Spring-loaded stabilizer bar
• 3-foot clear discharge hose and clamp
• 8-foot grounded power cord w/plug
• Integrated 24 hour timer

Mighty Mini SST Online Ordering

TubeTastic!™ Oil Skimmer

The Abanaki TubeTastic! oil skimmer can be used on machining centers with little or no access to the coolant sump from above. This unit can skim oil from chip conveyors or even totally enclosed machining centers!

• Fan-cooled continuous duty motor
• Oil pickup rate of up to 1 1/2 g.p.h.
• Works in places where other skimmers can't
• Standard tube lengths in reach: 8", 12", 18" and 24". Longer lengths available

Animated Demo:

View Animation

EconoMixer™ New!

EconoMixer 100 Coolant Proportioning Mixer and Dispenser drum or wall mounted proportioners automatically mix liquid coolant concentrates with water and dispense the diluted solution into any sump or container. The EconoMixer 200 is designed for speed, accuracy, and cost savings. Simply insert the unit into a 15 – 55 gallon drum of coolant concentrate and connect a water line to the unit.

• Increased productivity of employees
• Efficient use of space
• Enhanced safety
• Maximized cleaning product performance
• More conscientious response to environmental concerns.

Animated Demo:

View Animation

Coolescer™ Coolant Refresher

The Abanaki Coolescer is a must for any machine shop dealing with machine tool coolant. This unit will extend coolant life, reduce disposal costs, eliminate down time, improve tool life and help prevent dermatitis.

• Leak proof fittings
• Crush resistant hose
• One year warranty
• Self contained system
• Coalescing cartridge never needs to be replaced

Case Studies & Product Photos

• Hahn Manufacturing Co.

Coolant Mints™

Put an end to that nasty rotten egg smell.

• Safe to handle and easy to use
• Eliminates coolant odors immediately by neutralizing hydrogen sulfide gases
• Not a perfume
• No disposal problems
• Contains no formaldehyde
• Safer and less expensive than biocides
• 1 tablet per week maintains 25 gallons of coolant
• 15 tablets per tube

Request Material Safety Data Sheet (MSDS) for Coolant Mints.

Coolant Mints Online Ordering

Abanaki Aerators

• Prevents anaerobic bacteria from building up and spreading
• Extends coolant life
• Eliminates the "rotten egg" smell
• Quality airstone diffuser disperses air evenly
• 2 units available:
  • AA1200 injects 1200 cc/min air for small sumps
  • AA5000 injects 5000 cc/min injects for large sumps

ChillyBits™

The ChillyBits air chiller uses compressed air to produce cold air to directly cool bits and tooling during machining operations.

• Eliminates mist cooling
• Uses no Freon
• Magnetic base for easy mounting
• Extends tool life
• Adjustable tip for precision tooling

ChillyBits Online Ordering