Half Sized Blog Element (Single Author Style)
Half Sized Blog Element (Multi Author Style)
Full Sized Blog Element (Big Preview Pic)
Removing oil from water is a crucial step in many processes across numerous industries. From extending tool life to staying in compliance with government agencies, oil skimmers provide a cost-effective solution to removing oil from water or coolant.
Companies always look for effective ways to remove oil from water or coolant. Here are few more easy tips to skim oil from water or coolant.
If the skimmer must be run when little or no oil is present, use an oil concentrator
Under most operating conditions, skimmers pick up oil with only small traces of water. However, as surface oil is reduced to a thin layer (1/16 inch thick or less), more water (or coolant) may be picked up along with the oil. When used in tandem with an oil skimmer, the oil concentrator solves this problem by providing final phase separation. The result of this is optimal levels of water or coolant becoming available for recycling, and virtually water-free oil for is collected by the skimmer.
Choose the right belt for your application
Take the time to study which belt best fits your application – it will maximize the life of the skimmer belt and optimize the efficiency of skimmer. This applies to both length of the belt and the material of which it is constructed. As mentioned previously, choose a belt length that assures contact with the liquid at its lowest level. Belt materials are wide ranging and need to be selected based on variables such as the type of oil being collected, the liquid media that the oil is being collected from, and whether the skimmer is being used in an interior or exterior application. Any good skimmer dealer should be able to offer assistance when it comes to belt selection. Testing different belt materials prior to final selection is always a wise course of action.
Choose the optimal location for the skimmer to be mounted
Power availability and accessibility for routine maintenance need to be considered when selecting the location of the unit. Once that locale has been narrowed down, the skimmer should be mounted so that the down stroke of the belt is facing the bulk of the floating oil and is not within 2 feet of a wall or a tank side. This will ensure that the belt will be positioned to attract the maximum amount of oil, without allowing any dead zones where oil can be allowed to become stagnant.
Always remember that the friendly support staff of Abanaki Corporation is just a phone call away to help you with any of your skimming needs. Abanaki has emerged as the world leader in oil skimming solutions, serving industries as diverse as iron and steel, wastewater, paper, food processing, automotive, environmental remediation and recycling. With a guiding principle that has become a corporate motto, “Clean Our World” is the philosophy we have in mind when servicing our customers. If you have any questions about your oil skimming application, please call us. We are here to help!
To learn more about oil skimmers, please contact our experts at 440-543-7400 or visit our website: www.abanaki.com
You are just one step away from downloading Abanaki’s most detailed resource on our oil skimming equipment. Simply click at the button to get your ultimate guide now.
{{cta(‘7a3c62bb-85db-4bee-83fc-799ead070e4d’,’justifycenter’)}}
Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbons from water and coolants. Often, an oil skimmer by itself can achieve the desired level of water purity.
In more demanding situations, oil skimming is a cost-effective means of removing most of the oil before using more complicated and costly treatments such as coalescers, membrane filters and chemical processes.
As with any piece of industrial equipment, there are guidelines that should be followed to promote optimal efficiency, as well as a long, trouble free operational life. Let’s take a look at a few tips that will help you get the most out your oil skimmer.
A skimmer is most effective when there is no turbulence in the media
Skimmers rely on the differences in specific gravities between oil and coolant or water that causes oil to float on top of water. In applications where turbulence is present, the process of oil rising to the top will be prolonged, with some oil remaining below the water until conditions allow gravity to ultimately prevail. Operating the skimmer predominantly during quiet times will give oil the chance to rise to surface and allow the unit to operate more effectively.
Keep a spare belt and wiper blades on hand
Being prepared for the unexpected is always good practice. While blades and belt are typically very durable and trouble free, you never want to be in a situation where the skimmer must be taken out of service until a new belt or wiper blades arrive from halfway across the country.
Choose a belt that is long enough so that the tail pulley is submerged when the liquid level is at its lowest point
Water and coolant levels can vary over time. Therefore, the skimmer needs to be capable of collecting oil when the levels are at their lowest. Taking the time to correctly size the belt prior to purchasing the unit will save a lot of headaches down the road.
Properly size the skimmer to the size of tank
Skimmers operate by breaking surface tension which allows oil to be attracted to the belt. If a unit is undersized, it will not have the strength to disrupt the surface tension of the liquid, meaning that oil will never make it to the belt. Sizing of the unit should always be based on the overall area of the tank, not the volume of oil that is expected in the tank. This will guarantee that the skimmer will be capable of overcoming the surface tension that is present for the given tank area.
To learn more about oil skimmers, please contact our experts at 440-543-7400 or visit our website: www.abanaki.com
You are just one step away from downloading Abanaki’s most detailed resource on our oil skimming equipment. Simply click at the button to get your ultimate guide now.
{{cta(‘7a3c62bb-85db-4bee-83fc-799ead070e4d’,’justifycenter’)}}
Abanaki Corporation Oil Skimming Division
17387 Munn Road
Chagrin Falls, OH 44023
Phone: (440) 543-7400
Email: skimmers@abanaki.com
Fax: (440) 543-7404
ISO 9001:2015 Certified Company
Tips for Effective Oil Skimming – Part 3 | Abanaki
Tips for Effective Oil Skimming – Part 3
Tips for Effective Oil Skimming – Part 2 | Abanaki
Tips for Effective Oil Skimming – Part 2